[cpia] Creative Webcam II (Parallel) problems

[Sam Reynolds]

I still have been unable to get mine working.  I am still getting the
/dev/video: No such Device error.  I have parport_probe in my kernel and
have tried with kernel 2.2.15 and 2.4.0-test5 and cpia 1.0 and 1.1.  If
you could give any insight on how you installed it, it would be greatly
appreciated.  
Thank you,
	Sam Reynolds

On Fri, 4 Aug 2000, j.m.maurer wrote:

> doing a insmod parport_probe did the trick!
> 
> Thanx! It works even better than under windows [more fps]
> 
> Marc
> 
> 
> 
> "j.m.maurer" wrote:
> 
> > Hi All!
> >
> > I've got some problems getting the webcam working...
> > This is the output of dmesg [running 2.4.0-test4]:
> >
> > 0x378: FIFO is 16 bytes
> > 0x378: writeIntrThreshold is 8
> > 0x378: readIntrThreshold is 8
> > 0x378: PWord is 8 bits
> > 0x378: Interrupts are ISA-Pulses
> > 0x378: ECP port cfgA=0x10 cfgB=0x4b
> > 0x378: ECP settings irq=7 dma=3
> > parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
> > parport0: irq 7 detected
> > parport0: cpp_daisy: aa5500ff(10)
> > parport0: assign_addrs: aa5500ff(10)
> > parport0: Multimedia device, VLSI Vision Ltd DUAL Camera
> > Linux video capture interface: v1.00
> > V4L-Driver for Vision CPiA based cameras v1.1.0
> > Parallel port driver for Vision CPiA based cameras v1.1.0
> >
> > It detects the webcam, but not a single app. seems to work [they say
> > that
> > I've no /dev/video0 etc. while they are certainly there]
> >
> > I've no problems using the webcam under windows :(
> >
> > Can anyone give me a hint?
> >
> > Thanx in advance,
> >    Marc
> >
> > _______________________________________________
> > cpia mailing list  -  cpia@risc.uni-linz.ac.at
> > http://mailman.risc.uni-linz.ac.at/mailman/cgi-bin/listinfo/cpia
> 
> 
> _______________________________________________
> cpia mailing list  -  cpia@risc.uni-linz.ac.at
> http://mailman.risc.uni-linz.ac.at/mailman/cgi-bin/listinfo/cpia
>