[cpia] Device or resource busy

[Samo Gabrovec]

Hello!
i had problems with ligthning settings ... but i asked a around and i got
it somewhat i wanted. 
but here`s another problem, which happened to me secund time.
when i first pluged in the camera a minute haven`t passed and the cam was
working. then i needed to install so Wireless Lan on the server and i had
to re-kompile the kernel then i rebooted the cam worked.
2 days later i removed the modules cpia, cpia_pp, parport_pc, parport ...
then forgot about that and when i tried to load the cpia module with
loadpp it said 
--------------------------
mail:/download/cpia-0.7.1/module # ./loadpp
cpia_pp.o: init_module: Device or resource busy
=========================
At that time i was comfused and i blameed the new kernel, i rebooted ....
nothingm then i swithed the kernel to the old one and the cam started to
work (i might have tried the cam on a windows machine before that i don`t
remember) i t was working until yesterday. i even swithed from the 6?? to
7.1 in the mean time. 7.1 worked for 3 days i think. Now I removed all
modules and tried to load it nothing i get that the device is busy. How
can it be busy ? i`m gona paste you the modules that are loaded at
startup.
--------------
es1371                 25888   0  (autoclean)
soundcore               2336   4  (autoclean) [es1371]
3c59x                  19008   1  (autoclean)
ne2k-pci                4584   1  (autoclean)
8390                    6228   0  (autoclean) [ne2k-pci]
serial                 42932   1  (autoclean)
memstat                 1604   0  (unused)
---------------
then i do loadpp
=========================
mail:/download/cpia-0.7.1/module # ./loadpp
cpia_pp.o: init_module: Device or resource busy
mail:/download/cpia-0.7.1/module # lsmod
Module                  Size  Used by
cpia                   41304   0
videodev                2496   0  [cpia]
parport_pc              5748   0  (unused)
parport                 6716   0  [parport_pc]
es1371                 25888   0  (autoclean)
soundcore               2336   4  (autoclean) [es1371]
3c59x                  19008   1  (autoclean)
ne2k-pci                4584   1  (autoclean)
8390                    6228   0  (autoclean) [ne2k-pci]
serial                 42932   1  (autoclean)
memstat                 1604   0  (unused)
======================================================
In The log file i can see the folowing 
------------------------------------------
Feb 11 14:03:27 mail popper[942]: connect from 129.177.47.12
Feb 11 14:07:26 mail kernel: parport0: PC-style at 0x378
[SPP,ECP,ECPEPP,ECPPS2]
Feb 11 14:07:26 mail kernel: Linux video capture interface: v1.00
Feb 11 14:07:26 mail kernel: V4L-Driver for Vision CPiA based cameras
v0.7.1
Feb 11 14:07:26 mail modprobe: modprobe: Can't locate module cpia_pp
Feb 11 14:07:26 mail modprobe: modprobe: Can't locate module cpia_usb
Feb 11 14:07:26 mail kernel: Parallel port driver for Vision CPiA based
cameras v0.7.1
Feb 11 14:07:26 mail kernel:   0 camera(s) found
================================================= 
The cable is connected to the printer port. printer port is working or at
least it was working yesterday.
What would be my problem!?
Did that happen to anyone else? 
I have pentium II 450 mhz 128mb ram running SuSe 6.3 (2.2.13)

Thanks 

Samo Gabrovec 
 

----------------------------------------------------------------
Oxymoron: Sharp Cookie.
----------------------------------------------------------------
http://www.velenje.cx
----------------------------------------------------------------