[cpia] problems with intel playcam
Robert Ladstaetter
robert@work.vc-graz.ac.at
Fri, 1 Sep 2000 11:22:55 +0200 (CEST)
hi,
i've successfully installed the terracam usb webcam, and after that I wanted
to do the same with the intel playcam (me2cam, which is said to be supported
too by the cpia driver);
kernel: 2.3.99pre9
everything loads ok, but in
/var/log/messages i get:
Aug 31 11:49:16 dmt kernel: usb.c: USB new device connect, assigned device
number 2
Aug 31 11:49:16 dmt kernel: usb.c: kmalloc IF c5b78ec0, numif 1
Aug 31 11:49:16 dmt kernel: usb.c: new device strings: Mfr=0, Product=0,
SerialNumber=0
Aug 31 11:49:16 dmt kernel: usb.c: unhandled interfaces on device
Aug 31 11:49:16 dmt kernel: usb.c: This device is not recognized by any
installed USB driver.
<this line doesn't sound all too good, then I get more stuff like:>
Aug 31 11:49:16 dmt kernel: Length = 18
Aug 31 11:49:16 dmt kernel: DescriptorType = 01
Aug 31 11:49:16 dmt kernel: USB version = 1.00
Aug 31 11:49:16 dmt kernel: Vendor:Product = 0813:0002
Aug 31 11:49:16 dmt kernel: MaxPacketSize0 = 8
Aug 31 11:49:16 dmt kernel: NumConfigurations = 1
Aug 31 11:49:16 dmt kernel: Device version = 1.00
Aug 31 11:49:16 dmt kernel: Device Class:SubClass:Protocol = 00:00:00
Aug 31 11:49:16 dmt kernel: Per-interface classes
[....] (about 100 lines)
if I load usbcore, videodev, cpia and cpia_usb the directory /proc/cpia
exists, but is empty (?). if I make a 'cat /dev/video' everything I get is an
'Unknown Device/Device doesn't exist'. Unfortunately in the docs the only
thing which relates to this problem is the line: 'everything should be detected
automatically'. Well, that obviously isn't the case. ;-).
I suspekt that the camera doesn't function, but maybe this is a common problem
with an easy solution. *crosses his fingers*
the terracam worked right out of the box, but on another machine I right now
don't have access to. (very unfortunate ;-)
greetings from austria,
robert
--
mfG
Ladstaetter Robert mailto:ladi@sbox.tu-graz.ac.at