From r3pek@r3pek.homelinux.org Sun Jan 18 23:40:21 2004 From: r3pek@r3pek.homelinux.org (Carlos Silva) Date: Sun, 18 Jan 2004 23:40:21 -0000 (WET) Subject: [cpia] SpaceC@m 100 Message-ID: <33352.213.22.30.171.1074469221.squirrel@webmail.r3pek.homelinux.org> Hi guys. i'm trying to configure my webcam on my box but the CPiA driver don't find any webcam. here's my lsusb: # lsusb Bus 003 Device 003: ID 06a5:d800 Divio Bus 003 Device 001: ID 0000:0000 Bus 002 Device 003: ID 09da:0018 A4 Tech Co., Ltd Bus 002 Device 002: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 the first device is my webcam. dmesg | grep cpia: cpia_usb: Unknown symbol cpia_register_camera cpia_usb: Unknown symbol cpia_unregister_camera request_module: failed /sbin/modprobe -- cpia_usb. error = 256 drivers/usb/core/usb.c: registered new driver cpia when i first try to load the module, it gives that "Unknown symbol" error. after i remove and insert the webcam from the usb port, it's still not detected. i'm running kernel 2.6.1 am i doing any thing wrong? From f.duncan.m.haldane@worldnet.att.net Mon Jan 19 07:54:10 2004 From: f.duncan.m.haldane@worldnet.att.net (Duncan Haldane) Date: Mon, 19 Jan 2004 02:54:10 -0500 (EST) Subject: [cpia] SpaceC@m 100 In-Reply-To: <33352.213.22.30.171.1074469221.squirrel@webmail.r3pek.homelinux.org> Message-ID: Your webcam is not a CpiA device: this is what a CPiA usb device reports (webcam) Bus 002 Device 003: ID 0553:0002 VLSI Vision Ltd. CPiA WebCam Sorry! On 18-Jan-2004 Carlos Silva wrote: > Hi guys. > > i'm trying to configure my webcam on my box but the CPiA driver don't find > any webcam. > > here's my lsusb: ># lsusb > Bus 003 Device 003: ID 06a5:d800 Divio > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 003: ID 09da:0018 A4 Tech Co., Ltd > Bus 002 Device 002: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 001: ID 0000:0000 > > the first device is my webcam.