[cpia] gqcam with Creative WebCam II
Sang Y. Yum
tdat@yahoo.com
Sun, 12 Mar 2000 20:56:56 -0800 (PST)
Cory,
I hope you don't mind me asking for technical
assitance but I practically ran out of things to try.
As specified in the subject, I'm trying to get WebCam
II Parallel port version with gqcam. I've successfully
loaded all the drivers without any error. My camera is
detected by the drivers, as shown below:
Mar 12 20:51:11 localhost kernel: bttv0: Brooktree
Bt878 (rev 2) bus: 0, devfn:
120, irq: 10, memory: 0xeddfd000.
Mar 12 20:51:11 localhost kernel: PCI: Enabling bus
mastering for device 00:78
Mar 12 20:51:11 localhost kernel: bttv: 1 Bt8xx
card(s) found.
Mar 12 20:51:11 localhost kernel: bttv0: Hauppauge
eeprom: tuner=Philips FI1236
MK2 (2)
Mar 12 20:51:11 localhost kernel: bttv0: NO fader
chip: TEA6300
Mar 12 20:51:11 localhost kernel: bttv0: model:
BT878(Hauppauge new)
Mar 12 20:51:23 localhost kernel: parport0: PC-style
at 0x378 (0x778) [SPP,ECP,ECPPS2]
Mar 12 20:51:26 localhost kernel: parport0: read2
timeout.
Mar 12 20:51:26 localhost kernel: parport0: Multimedia
device, VLSI Vision Ltd PPC2 Camera
Mar 12 20:51:47 localhost kernel: V4L-Driver for
Vision CPiA based cameras v0.7.3
Mar 12 20:51:47 localhost modprobe: can't locate
module cpia_pp
Mar 12 20:51:52 localhost kernel: Parallel port driver
for Vision CPiA based cameras v0.7.3
Mar 12 20:51:52 localhost kernel: using PIO mode
Mar 12 20:51:52 localhost kernel: 1 camera(s) found
When I execute gqcam (0.6 version), the window comes
up but fails to show anything. When I do File->Open
Camera and select /dev/video, gqcam terminates with
the message:
[sang@pikatsu gqcam-0.6]$ ./gqcam
/dev/video: Device or resource busy
As you might have guess from the first output, I also
have WinTV tuner card installed, which is configured
and working. I have a feeling that it's somehow
interfering with my WebCam. When gqcam comes up, it
has "Gqcam - BT878 (Hauppaug new)" in the title bar.
Hauppaug is the manufacturer of WinTV tuner card.
Here is the list of modules loaded before I execute
gqcam:
[sang@pikatsu gqcam-0.6]$ /sbin/lsmod
Module Size Used by
cpia_pp 18904 0
cpia 48252 0 [cpia_pp]
parport_probe 3588 0
parport_pc 7604 1 [cpia_pp]
parport 8084 1 [cpia_pp
parport_probe parport_pc]
bttv 37432 0
videodev 2592 3 [cpia bttv]
i2c 4192 1 [bttv]
ip_masq_irc 1456 0 (unused)
ip_masq_raudio 2896 0 (unused)
ip_masq_ftp 3696 0 (unused)
3c59x 18632 1 (autoclean)
ide-scsi 7584 0
supermount 14880 3 (autoclean)
nls_iso8859-1 2052 1 (autoclean)
nls_cp437 3580 1 (autoclean)
vfat 11004 1 (autoclean)
fat 32640 1 (autoclean) [vfat]
emu10k1 56212 0
soundcore 3524 5 [emu10k1]
I tried gqcam with bttv module unloaded but that
seemed to remove /dev/video deivce altogether.
Sorry for a length note. If you have any suggestion, I
would really appreciate it.
Sang
=====
Sang Y. Yum http://www.yumnet.dyndns.org/~sang
San Diego, CA mailto:tdat@yahoo.com
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com