[cpia] CPIA 1.0 in 2.2.14 with USB 2.3.99-pre7 Backport 2.2.14 problems
Jose Miguel Buenaposada Biencinto
jmbuena@dia.fi.upm.es
Fri, 19 May 2000 16:46:16 +0200
Hi, again !
I'm here again because nobody answered my other emails. So I hope there
is a response this time, thank you anyway.
I have read the usb mailing list archive and I have found people with
the
same problem than me. So I think is an interesting question than must be
resolved (well, I'm very interested in it, of course ;) ). One person
get a OV511
cam working with 2.2.14+2.3.99-pre7 USB backport in one computer and
can not work in other computer getting:
usb_control/bulk_msg: timeout messages so the cam is not
recognized.
Well, I have a similar problem but with a USB Zoom Cam. I have tried 2
versions of
the backport (usb-2.3.99-pre7-1-for-2.2.14.diff.gz and
usb-2.3.50-1-for-2.2.14.diff.gz)
with kernels 2.2.14 and 2.2.15 with the same results (SMP kernel):
May 19 16:13:22 hal kernel: V4L-Driver for Vision CPiA based cameras
v1.0.0
May 19 16:13:22 hal insmod: /lib/modules/2.2.14/misc/cpia_usb.o: insmod
cpia_usb failed
May 19 16:13:22 hal kernel: usb.c: registered new driver cpia
May 19 16:15:34 hal kernel: usb.c: USB new device connect, assigned
device number 2
May 19 16:15:37 hal kernel: usb_control/bulk_msg: timeout
May 19 16:15:49 hal last message repeated 4 times
May 19 16:15:49 hal kernel: usb.c: USB device not responding, giving up
(error=-110)
May 19 16:16:14 hal kernel: usb.c: USB disconnect on device -1
May 19 16:16:17 hal kernel: usb.c: USB new device connect, assigned
device number 2
May 19 16:16:20 hal kernel: usb_control/bulk_msg: timeout
May 19 16:16:32 hal last message repeated 4 times
May 19 16:16:32 hal kernel: usb.c: USB device not responding, giving up
(error=-110)
The USB subsystem is not able to contact with the cam, I think.
Anyway, when I use the kernel 2.3.51 (SMP kernel) I can view my not very
pretty face ;)
in the screen. I can use it without problems. Well my intention is to
debug the problem
but I'm not a kernel hacker so I ask you for some help in what to do to
find the problem
, what can I do ? I need the cam working in 2.2.x kernels.
Thaks you very much for any help.
Here is some information:
[root@hal usb]# cat /proc/version
Linux version 2.2.14 (gcc version egcs-2.91.66 19990314/Linux
(egcs-1.1.2 release)) #3 SMP Fri May 19 15:58:43 CEST 2000
[root@hal usb]# cat /proc/interrupts
CPU0 CPU1
0: 102209 99257 IO-APIC-edge timer
1: 4660 4200 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
4: 7856 8503 IO-APIC-edge serial
11: 0 0 IO-APIC-edge usb-uhci
13: 1 0 XT-PIC fpu
16: 40330 40465 IO-APIC-level aic7xxx, aic7xxx
17: 0 0 IO-APIC-level es1371
18: 15180 14840 IO-APIC-level eth0
NMI: 0
ERR: 0
[root@hal usb]# cat /proc/modules
cpia_usb 4784 0 (unused)
cpia 58064 0 [cpia_usb]
usb-uhci 22304 0 (unused)
usbcore 43592 0 [cpia_usb usb-uhci]
videodev 2592 0 [cpia]
es1371 27904 0
soundcore 2564 4 [es1371]
[root@hal usb]# /sbin/lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge
(rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:09.0 Multimedia audio controller: Ensoniq ES1371 (rev 08)
00:0a.0 Ethernet controller: 3Com Corporation: Unknown device 9200 (rev
74)
00:0c.0 SCSI storage controller: Adaptec 7896
00:0c.1 SCSI storage controller: Adaptec 7896
01:00.0 VGA compatible controller: Matrox Graphics, Inc.: Unknown device
0525 (rev 04)
--
-------------------------------------------------------------------
Jose Miguel Buenaposada Biencinto
Facultad de Informática | Computer Science School
Universidad Politécnica de Madrid (UPM) | Madrid Tech. University.
Campus de Montegancedo s/n
28660 Boadilla del Monte, Madrid (ESPAÑA)| (SPAIN)
Voice +34 91 336 69 47
e-mail: jmbuena@dia.fi.upm.es
web : http://www.dia.fi.upm.es/~jmbuena
-------------------------------------------------------------------